Xiaomi YI 4k

[Nedo]

Hello!! I was thinking in that camera.. Did you have good results with it?

thanks!

Hi Darth....err Anakin
Look here is an 3D Modell created with this camera,
of course you have to decide for yourself if the quality is good enough.

[Anakin]

Andrea, can i mix cameras in 3DF Zephyr?
Lets say i use the YI 4K+ for the whole model,
and then use my Nikon for only a few parts where i need hires Textures?

Hello!! I was thinking in that camera.. Did you have good results with it?

thanks!

[Roberto]

Yes, you can mix different cameras without problems. You can also select a subset of images to use for texturing. Sometimes it's better to select just a subset at a fixed distance or with known higher quality.

[Nedo]

Andrea, can i mix cameras in 3DF Zephyr?
Lets say i use the YI 4K+ for the whole model,
and then use my Nikon for only a few parts where i need hires Textures?

[Nedo]

Hi Andrea, i will shot a a new set with the 3840x2160 setup, and extract the pics for you.
Until then, check out here the result with the 4000x3000 setup:

[Andrea Alessi]

Hey Nedo,

thank you! If you have a dataset you can share with us, i'll see what can be done about it

[Nedo]

Hi Andrea, just wanted to inform you, after some testing i found out that the scans work if you are filming at 4000x3000@30fps, that's the same resolution when you do just photos,
zephyr know this, its in the database, i had no luck while filming at 3840x2160, but thats the interesting resolution because you can record @60fps.
The 3D modells are ok, but the textures are missing alot details compared to my Nikon DSLR, so i think i will sell the camera and wait for the 8K cam

greetings Nedo

[Andrea Alessi]

Hehe nah, we're very transparent in every step

[Nedo]

ahh now i get it, i thought there is a hidden secret mathematical algorithmic in the noise pattern for calibrating!

[Andrea Alessi]

Hi Nedo,

monitor size doesn't really matter. Basically the noise pattern is used because it's very feature-rich. Printing it would also help. But basically, this is done only as a very quick and failsafe mode to show something the *we* know it's feature rich. You could easily run the same process with your own photos.

Since you're now also a happy owner of the pro, you could also simply run a dataset and export the calibration once the sparse cloud has been generated

Ah yes then! video frames have no exif information whatsoever. So you'll have to make your own calibration when using frame from videos. If you're using photos, our online calibration will be downloaded.

[Nedo]

Hi Andrea,
i just started to learn lapyx, but i have some few questions, does the monitor size matters when taking photos from the noise pattern? A bigger Monitor better?
Would it work printing the noise pattern on paper and then doing the calibration?
About the YI 4K+ cam, i will try the Photo Modus first, maybe zephyr will find the exif information then, what i did so far was only using pictures from the video mode.
I will let you know the results.

Nedo

[Andrea Alessi]

Hi Nedo!

we have a xiaomi in our database, so it looks like you were taking photos with a different focal lenght than what we have in database! If you can send me a dataset (eiher from lapyx or from a good reconstruction) i'll gladly add the missing calibration asap!

[Nedo]

Good morning, i know this is an older post, but did you got the camara calibrated?
i just bought a Yi 4k+ camera for quick scans on the go,
didnt tested it yet fully, just realized zephyr didnt have the Yi 4k+ camera in the database?
I think i'l have to go through the manual camera calibration too.

Btw. this is the camera:

[3dscanreality]

thank you
well, if you dont mind, i'm sending you via wetransfer the dataset

really thank you for your patience