White Seams on the model

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • tripledad
    replied
    OK Thank you, I think it works

    Leave a comment:


  • cam3d
    replied
    Hi tripledad

    The white you are seeing are because there is a slight misalignment with the mesh and the cameras projecting the texture, and the background gets projected onto the surface of the model.

    I highly recommend not using a white background with polarisation, as light bounces around the white surfaces and depolarises - Switch out your white background for a black one. Masking, if you haven't already, will help speed up processing times and give better results. Here's a tutorial on the subject: https://www.3dflow.net/technology/do...for-turntable/

    Leave a comment:


  • tripledad
    started a topic White Seams on the model

    White Seams on the model

    Hi Folks,

    I tried to build a statuette with about 100 photos. Result looks good but I get always some white seams at the corners.
    for my opinion, the pics are good. made the photos with a polarisation filter on the cam.
    Any sugestions to prevent it?

    Greetings
    Ralf
Working...