Not able to edit geotiff's generated in 3Df zephyr in ENVI

[cam3d]

All good! Happy to help where I can :-)

[Caesar]

Hi Cam3d, I contacted support and they think it was a calibration issue. I thought I had calibrated all the photos, but I guess not. I didn't realize how long that takes in zephyr. The new stitch should be done later tonight, and I'll check it on Monday.

Thank you for your help. : )

[Caesar]

Hi Cam3d, sorry about that. I'll try getting that software and I'll try reposting tomorrow.

[cam3d]

Hi Caesar - Sorry but those links aren't working. Please use an alternative like WeTransfer - Usually works without issue :-)

[Caesar]

[Caesar]

Here are some photos and an Icloud link to a video I did on my iphone.

[Caesar]

Hi Cam3d, I can't upload my files, they are too large and zephyr wouldn't accept less photos to stitch together. I'm going to take some photos of the ENVI platform to hopefully give you a better idea of what I'm talking about.

[Caesar]

Hi Cam3d,
I think I can do that, what I used before was Agisoft Metashape. The files I work with are pretty big, so I'll try to trim one down using both Zephyr and Agisoft. I hope to get this done nest week.
Thank you for your time. : )

[cam3d]

Hi Caesar - Welcome to the forum - I'm not familiar with ENVI, but we can probably troubleshoot a bit regardless.

Do you have a sample geotiff which works with your ENVI workflow that we could compare to the output from Zephyr?

Feel free to drop a download link in this thread, or alternatively send the download link to support@3dflow.net

[Caesar]

Hi, I'm a new zephyr user. I needed a new stitching program for drone flights over agricultural fields. I was able to generate the ortho's and DTM & DSM, but when I open the mosaic's in ENVI I'm not able to edit the metadata. ENVI is where I do a lot of post processing. I tried changing the tiff file to a dat file, but that didn't work. Any suggestions or a step I missed would be greatly appreciated.
Thx.